Best Ender 3 Motherboard Upgrade: Our Favourite Picks

Are you trying to find the best Ender 3 Motherboard Upgrade, Overwhelmed by all the options? Welcome to your destination. The following is a comprehensive guide to buying Ender 3 Motherboard Upgrade. If you are uncertain where to start your research, do not worry, we have you covered.

The sheer number of options out there makes going through thousands of reviews extremely frustrating. Look over the reviews, then make an informed purchasing decision based on this ultimate guide.

Best Ender 3 Motherboard Upgrade in 2022: Top 10 Picks List

Best Ender 3 Motherboard Upgrade Review in our Top 10 Picks

Bestseller No. 1
Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Pro Customized and Non-Standard Matching,Ender 3 Pro Silent Motherboard
  • Creality new release silent motherboard V4.2.7 to 32bit, compatible with Ender 3 Pro.
  • Super quiet by TMC2225 driver , bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
  • Firmware comes pre- installed, pre-configured for the Ender 3 Pro, makes it totally plug & play.
  • This silent mainboard preinstalls the Ender-3 Pro firmware. If you want to install it in your Ender 3/Ender 3 v2/Ender-5, need to flash the Ender 3/Ender 3 v2/Ender-5 firmware.
Bestseller No. 2
Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 (Customized and Non-Standard Matching)
  • Super Quiet. Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 & Ender 3 Pro. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from official website.
  • Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
  • Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
  • Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
SaleBestseller No. 3
Creality Ender 3 / Pro Color Display Screen and 4.2.7 32 Bit Silent Control Board with 2021 Marlin Firmware and Easy Installation Complete Plug and Play Upgrade Kit, Guide and Mounting Hardware
  • F1RST LAYER is an authorized distributor of Creality And Antclabs. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support you need, done right, the F1RST time! Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listing’s photos when installing!
  • Ender 3 users can use the Ender 3 Pro firmware already flashed onto the board OR update it with Ender 3 firmware. IF YOU ALREADY HAVE A BLTOUCH or filament runout sensor then you WILL have to update the firmware. THE INSERT CARD THAT COMES WITH THIS PRODUCT HAS A URL LINK WHERE YOU CAN FIND ALL OF OUR FIRMWARE. The process of replacing your board and flashing the firmware will take less than 1 hour and will quickly turn your stock Ender into a multi-featured high end printer in just one upgrade!
  • This color screen improves UI and user experience by offering a more refined display and rotating knob for straightforward menu navigation. The V2 Screen also provides a feeling of substantial added value to older model printers. This color screen is certain to brighten your day. IF YOU ALREADY HAVE A BLTOUCH or filament runout sensor then you WILL have to update the firmware (please see the product description). Firmware updates takes roughly 2 minutes to complete.
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32 Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates. This board also has support for a BL Touch and/or filament run out sensor.
  • If you do ALREADY have a Bltouch and/or a filament runout sensor then please update your firmware using the link in the Product description. This folder also contains wiring diagrams for the 4.2.7 board and other accessories you may already have such as a Bltouch and/or a filament runout sensor. We are here to help you every step of the way, so if you encounter any difficulties or have any queries whatsoever then please message us directly.
SaleBestseller No. 4
Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen with 4.2.7 32-Bit Silent Control Board and Silent Fan Upgrade Kit - Improved UI and Faster operation (Now Open Source)
  • This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer with Insanity Automation. The ONLY open source Ender touch screen on Amazon fully Plug-And-Play from the factory flashed with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!
  • A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with authentic TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. The 4.2.7 control board comes flashed with our custom Marlin firmware for the Ender 3 Pro. This entire hardware swap will take less than 1 hour and quickly turns your stock Ender into a touch operated printer in just one upgrade as well as add dozens of features over stock Creality firmware!
  • The upgraded silent fan included can be placed on the hotend or the control board however since the hotend fan is running at all times, it is suggested to be installed there. To avoid needing to re-route all the wires through the wire harness, you can cut the wires from the old fan and splice them onto the new silent fan for a pain free swap!
  • First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open source potential! This kit is completely Plug-and-Play and enhance your Ender 3 with previously unavailable features, while also allowing for the BL Touch upgrade in the future if you want to install it. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Stock Creality firmware for the 427 board WILL NOT work with this screen
SaleBestseller No. 6
Offical Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 V2 Customized and Non-Standard Matching,Ender 3 V2 Silent Mother Board
  • Creality new release silent motherboard V4.2.7, 32bit,compatible with Ender 3 V2
  • Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
  • Firmware comes pre-installed, pre-configured for the Ender 3 v2, makes it totally plug & play.
  • This silent mainboard preinstalls the Ender 3 V2 firmware. If you want to install it in your Ender 3 /Ender3 Pro/ Ender-5, need to flash the Ender 3 /Ender 3 Pro/Ender-5 firmware.
Bestseller No. 7
Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard with TMC2225 Stepper Motor Driver V4.2.7 Version for Ender 3/Ender 3 pro/Ender 3X
  • New Version: This is the newest Silent Controller board for Creality 3D printers
  • Driver:TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable.
  • Thermal runaway protection is enabled.The Board is Optimized by Circuit ,effectively solve the Heating Problem.
  • Easy to Operate:With USB Port,can be Worked with E/Z/Y/X Axis Motor Fimware 1.1.8 comes pre-installed on this board.Suitable for Ender-3 /Ender3 Pro.
SaleBestseller No. 8
Authentic Creality 4.2.7 32 Bit Silent TMC2225 Motherboard and 24V Ultra Silent RGB Fan Upgrade Kit for Ender 3 / Ender 3 Pro/Ender 5
  • This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates.
  • The silent fan is intended for use as the hotend cooling fan. The wires are 1 meter long and can reach the control board. Alternatively, the fan can be spliced with the stock fan wires (see product description). The 4.2.7 board is compatible with ALL Ender Series printers as a direct swap for older model v1.1.5. The board is flashed with Ender 3 Pro firmware that works flawlessly on the Ender 3. Ender 3 V/5 users must update firmware (see product description). Firmware update takes 3 minutes.
  • The silent fan included is intended for use as the hotend cooling fan. The wires on this fan are too short and need to be spliced with original fan wires to be long enough to reach the control board. Compatible with ALL Ender Series printers as direct swap for older model v1.1.5. If using with Ender 3 OR Ender 5 Please flash the proper firmware for your printer. This is a very simple 3 minute process and there is an extensive video guide for the entire process. Links in the description.
  • Compatible with Ender Series printers as direct swap for older model v1.1.5. All wiring positions are identical and match with each board making for a simple install. The drastic difference will be noticed immediately as this board eliminates almost all noise from the stepper motors making the printer inaudible from any other room in your home or apartment. If you have wish to update the boards firmware then please follow instructions on the insert card that comes with this product.
  • F1RST LAYER is an authorized distributor of Creality And Antclabs. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RSTLAYER DIRECTLY for the Tech support. Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listing’s photos when installing! FIRMWARE LINK IN PRODUCT DESCRIPTION!
SaleBestseller No. 9
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3, with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
  • 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip;Integrate UART mode of TMC2209 to simplify debugging of motherboard and driver.Reserve expansion ports for TMC2209 pins to facilitate users to use DIAG instead of Endstop.
  • 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
  • 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.)
  • 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales personnel to solve your problems; Thank you for your support.
Bestseller No. 10
Official Creality 3D Printer Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5
  • 【Super Quiet】The silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).
  • 【Widely Application】Compatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the relative machine V4.2.7 firmware. You can download firmware from official website.
  • 【Driver】TMC2225 driver & V0.0.6 firmware from Creality ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
  • 【Update Firmware Method】Please copy the correct firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
  • 【After Sale Service】Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.

How To Choose The Ender 3 Motherboard Upgrade? – Our Favourite Picks

Do you get stressed out thinking about shopping for a great Ender 3 Motherboard Upgrade? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ender 3 Motherboard Upgrade which is why we have assembled a comprehensive list of the greatest Ender 3 Motherboard Upgrade headset available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ender 3 Motherboard Upgrade that you consider buying. Your questions might include the following:

  • Is it worth buying Ender 3 Motherboard Upgrade?
  • What benefits are there with buying Ender 3 Motherboard Upgrade?
  • What factors deserve consideration when shopping for an effective Ender 3 Motherboard Upgrade?
  • Why is it crucial to invest in any Ender 3 Motherboard Upgrade, much less the best one?
  • Which Ender 3 Motherboard Upgrade are good in the current market?
  • Where can you find information like this about Ender 3 Motherboard Upgrade?

,

We’re convinced that you likely have far more questions than just these regarding Ender 3 Motherboard Upgrade , and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Ender 3 Motherboard Upgrade , rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ender 3 Motherboard Upgrade . Make sure that you are only using trustworthy and credible websites and sources.

We provides the Ender 3 Motherboard Upgrade buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ender 3 Motherboard Upgrade currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

1. Brand Value: Every brand of Ender 3 Motherboard Upgrade has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.

2. Features: What bells and whistles matter for an Ender 3 Motherboard Upgrade ?

3. Specifications: How powerful they are can be measured.

4. Product Value: This simply is how much bang for the buck you get from your Ender 3 Motherboard Upgrade .

5. Customer Ratings: Number ratings grade Ender 3 Motherboard Upgrade objectively.

6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ender 3 Motherboard Upgrade .

7. Product Quality: You don’t always get what you pay for with an Ender 3 Motherboard Upgrade , sometimes less, and sometimes more.

8. Product Reliability: How sturdy and durable an Ender 3 Motherboard Upgrade is should be an indication of how long it will work out for you.

We always remembers that maintaining Ender 3 Motherboard Upgrade information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ender 3 Motherboard Upgrade is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly!

Leave a Comment